Customize dashboard or monitoring tools

Customize dashboard or monitoring tools

Is there a way to customize the dashboard on MobiControl based on events? Or is there support for monitoring tools from other suppliers, for example PRTG? We could simply add PRTG in our network and apply auto discovery, but I was hoping to get more information in combination with MobiControl and events.

3 Answers

Order By:   Standard | Newest | Votes
Support Staff | posted this 05 February 2019

Hello Majid, 

 

When you are inquiring about "events" can you provide a little more information on what "events" you would like to include in your dashboard please.  

 

The MobiControl Dashboard can be configured with over 140 different properties sets from the devices to use in comparison VIA charts and graphs.

 

1)You can configure this by scrolling to the far right in the Dashboard and selecting the green add button and in the first drop down menu select Custom Chart. 

2)Then Select the type of Chart/Graph you would like to use.

3)In the proceeding 2 sections Property1 and/or Property2 select the data you would like to display or compare, this will determine the data from which your chart/graph is created with.

 

 

The Dashboard utilizes MobiControl's DB to provide the data unlike the PTRG tool that you have mentioned which is a Network monitoring tool itself that can provide information on your network monitor topology, IP addresses and if the Restful API's are communication or not.  

 

However this being the case, I can check to see if this is on the road map for future releases.   What is your use case if you don't mind me asking?

 

 

Technical Support | SOTI Inc. |1.905.624.9828 | support@soti.net | www.soti.net |

  • 0
  • 0
Majid | posted this 06 February 2019

Thanks for the response. Could it be that the Custom Chart is not available for version 13.4.0.4822?

Our use case would be to monitor 1000+ devices in a warehouse environment in order to have an overview and tackle issues proactively.

 
 

 
  • 0
  • 0
Raymond Chan | posted this 06 February 2019

Custom charts were introduced in v14.0.   Your v13.4.0 definitely does not support this feature.

 

  • 1
  • 0

Give us your feedback
Give us your feedback
Feedback