Enrolling a Motorola Device

Enrolling a Motorola Device

I am trying to enroll a Motorola One Device, when I do a factory reset, it will not give me the Option to enter the Enrollment Command AFW#MOBICONTROL , How Else can i do it ....

Thanks

 

Darius Hofer

6 Answers

Order By:   Standard | Newest | Votes
Matt Dermody | posted this 25 June 2020

What is the device model? Is it actually a Motorola device or is it Zebra?

  • 0
  • 0
Raymond Chan | posted this 25 June 2020

Upon facoty reset, after setting the preferred language, tap the device screen six times to see if your device switch on its camera to try to capture QR code.  If so,  you can download and install  Soti MobiControl Stage programmer (https://play.google.com/store/apps/details?id=net.soti.mobicontrol.programmer)  on an Android provisioning device, run it and have the various enrollment related parameters set, and use the QR-code generated on this provisioning device screen  for your Motorola One device camera to capture.  If your Motorola One device also support NFC, you might also try to set the provisioning device to NFC mode and  bump it to your Motorola One device to initiate enrollment to AE-DO mode just like using QR-code. 

 

The above assume your Motrola One device supports AE.  From search on the web, the list of supported models should include  at least Motorola One, Motorola One Action, Motorola One Hyper, Motorola One Macro, Motorola One Vision, Motorola One Zoom.

  • 0
  • 0
Darius Hofer | posted this 26 June 2020

Hi

How can I Check ??

  • 0
  • 0
Darius Hofer | posted this 26 June 2020

Hi

No, the Camera does not come on when you tap 6 times on screen ... after I select the Country 

  • 0
  • 0
Darius Hofer | posted this 26 June 2020

Motorola One Action

 

See Attached File

 

https://www.dropbox.com/s/rr0tilfcj8gn9nf/2020-06-26%2013.52.11.jpg?dl=0

  • 0
  • 0
Raymond Chan | posted this 28 June 2020

I don't have any Motrola One Action device to try out.

Have you tried tapping the device screen six times quickly in a row without changing the device language to be used?  This should be done right after a device factory reset.

 

  • 0
  • 0

Give us your feedback
Give us your feedback
Feedback